We Guarantee our work and your satisfaction.

We are bonded and insured and have a list of references upon request.

We are happy to quote any size job and will stand behind our work.

Soda Blasting Services!
Mobile Paint Stripping & Surface Cleaning

MTNK Boston's Soda Blasting can handle jobs large and small. From mold removal, and fire restoration to small boats and the largest yachts. We can remove old paint and rust from car bodies and engine parts. We even offer graffiti removal.

  • Marine/Boat Paint Removal and Cleaning
  • Fire Restoration
  • Auto Body Paint and Rust Removal
  • Mold Removal
  • Graffiti Removal
  • And much much more.

BEFORE

After

SodaBlast ADVANTAGES

Cleaning & De-Coating in One Step
Standard abrasive blasting is a dirty process, often loading and even embedding the surface with contaminants (grease, oil, tar & abrasive particles) in the process of removing the coating. Recycled abrasives compound this problem by loading increasing amounts of contaminants into the substrate. Our Natrium 260 blast media effectively de-coats and cleans the substrate in one step; producing a level of cleanliness not seen with most processes. The media is not reusable thus eliminating the issue of blasting with re-used media. Coating adhesion relies heavily on surface cleanliness and a surface profile has been used to offset this lack of cleanliness.

Unique Cutting Action
Natrium 260 blast media offers the unique properties of sodium bicarbonate, the primary ingredient. The softness (Mohs hardness scale of 2.4) and friable nature of this crystal produces a unique cutting action with little or no effect on most substrates. For example, thick coatings can be removed from glass without any etching effect. With proper care, delicate substrates can be cleaned without damage.

No Pre-Cleaning Required
For projects where the coating is covered with grease, carbon, salt or other contaminates, the more traditional methods require the coating to be fully cleaned before blasting. This is required so that the contaminants on the surface of the coating not be driven through the coating and into the surface of the substrate, causing future coating failure.

No Need to Re-Profile Steel
Natrium 260 Blast Media will not profile steel. When an operator removes a coating from a metal surface, he or she exposes the existing anchor pattern under the coating. Unless corrosion has occurred, there is no need to re-profile the surface.

Reduced Solid Waste
Natrium 260 blast media can be dissolved in fresh water. By dissolving the media and filtering out the contaminates, the solution can generally be discharged to POTW treatment systems or open waterways, with proper discharge permits. Waste volume is generally reduced to less than 5% of the original waste volume. With increasing landfill costs and liabilities, this advantage becomes more important every day.

Natural Rust Inhibitor
As long as Baking Soda is on a ferrous metal surface, rust will not form. For rust to form, free moisture and an acidic condition must exist. In most cases, free moisture combines with carbon dioxide in the atmosphere to form carbonic acid. This acid releases a free metal (ferrous) ion, which combines with oxygen (oxidizes) to form rust. Natrium 260 Blast Media buffers the acids, prevents the release of free metal ions and prevents rust.

Reduced Clean-Up costs
Natrium 260 blast media performs roughly the same level of work (somewhat slower) as sand blasting while producing 1/5 to 1/7 of the total waste volume. Although media costs per square foot are higher, site clean up and residue disposal are significantly lower. The net balance is that total cost per square foot are about the same for both approaches.

Benefits In Waste Disposal
In most non-hazardous applications, the residue from blasting with Natrium 260 Blast Media can be rinsed into sanitary drains or sewers, which flush the residue to a water treatment facility, greatly reducing the clean up time. Sodium bicarbonate is actually beneficial to waste water treatment systems. For industrial treatment systems, where chemical neutralization is a major cost in water treatment, Soda Clean blast media can often save significant dollars in waste treatment.

Increased Worker Safety
The safety of sodium bicarbonate to workers is well understood, since it has been in use for some 160 years. The bicarbonate buffer system is the major extracellular buffer for the human body, thus sodium bicarbonate is part of the body's normal chemistry. Sodium bicarbonate and thus, Natrium 260 Blast Media is not toxic via ingestion, inhalation or dermal contact, nor is it a skin or eye irritant as defined by EPA and OSHA. Any risk to workers is primarily the contaminate or coating removed during the blasting process.

Removes Odors
The same odor absorbing effect seen in the refrigerator at home is present when blasting with Natrium 260 Blast Media. It not only removes the contaminates, it also reduces the unfriendly odors.

Replaces Dangerous Solvents
Natrium 260 blast media when applied wet is an excellent de-greasing medium that eliminates the use of solvents in most cleaning processes. Natrium 260 Blast Media does not "dissolve" or "emulsify" grease or oils, it simply coats them causing the grease or oil to release from the surface. It also eliminates the translocation of oil and grease.

Does Not Produce Sparks
Natrium 260 blast media will not produce thermal sparks and is suitable for use in explosion proof areas; including refineries, chemical plants and grain elevators as long as proper grounding techniques are used to prevent a static charge build up.

Improved Crack Detection
When cleaning metal surfaces for crack detection, standard abrasive blasting tends to peen the crack closed or pack the crack with abrasive, making crack detection more difficult. Natrium blast media actually cleans out the crack, leaving it exposed and easy to see.

No Residue Problems In Small Passageways
Natrium blast media is 100% water soluble. It can be used to clean critical engine components including those with small passageways. Once cleaned, the baking soda residue can be thoroughly rinsed off by dissolving in water. Traditional blast material are not water soluble and if left after cleaning, can pack into small passageways and possibly damage an engine while on operation

Reduce Surface Acids
As a strong buffer for acids and alkalis, Natrium Blast Media eliminates acidic conditions on the surface of the substrate. For conditions with high acid levels, acid rain or boiler fly ash, blasting with Natrium Blast Media will reduce coating failures.